
N-scale Layout
- sandboarder
- Part of the Furniture
- Posts: 2764
- Joined: Tue Dec 29, 2015 1:55 pm
Re: N-scale Layout
Good to hear your working thru your issues and got them sorted with mates 

Re: N-scale Layout
Ya the three locos would run around the rear of the oval and stop or slow down then speed up, Used two different controllers and locos did the same thing so knew it had to be the track playing up to many joins too.
Re: N-scale Layout
Bought a little building for my layout today it makes up a farm house, This is what one has to work with no instruction sheet just one small photo of building done and a pile of parts to try work out were they go pullinghair Should make up a nice model once done yes!
don't ask me why I bought it might be because its cheap and there is not much in N-scale building around.



- Luke
- Part of the Furniture
- Posts: 2420
- Joined: Mon Dec 21, 2015 7:19 pm
- Location: Port Pirie SA (aka Lead City)
Re: N-scale Layout
Cool little kit Allan 

- sandboarder
- Part of the Furniture
- Posts: 2764
- Joined: Tue Dec 29, 2015 1:55 pm
Re: N-scale Layout
Looks like fun Al
Re: N-scale Layout
Cool it is but fun its not, Will be changing the colour on it.
Re: N-scale Layout
Also since I change the track from Atlas to Peco my old 44 class diesel runs around a lot better, Very happy with that too.


Re: N-scale Layout
Will have a few spare windows and doors left over from this build.
One has to put in 15 windows in the building and there is 36 and three doors with windows in them that you don't use.
Got main walls paint in a off white.
Just need to put clear plastic at the back of window frames and paint them so you can not see in. yes!
One has to put in 15 windows in the building and there is 36 and three doors with windows in them that you don't use.

Just need to put clear plastic at the back of window frames and paint them so you can not see in. yes!
- Luke
- Part of the Furniture
- Posts: 2420
- Joined: Mon Dec 21, 2015 7:19 pm
- Location: Port Pirie SA (aka Lead City)
Re: N-scale Layout
Get some sheet styrene scratch build a few walls and roof and use up the leftover parts. dunno
Re: N-scale Layout
That will be the idea, You can buy N-scale weather board plastic card and brick also roof tiles and iron.