Petit’gguy Strayblack and Catcos

User avatar
B61 MACK
Part of the Furniture
Posts: 4298
Joined: Thu Dec 24, 2015 3:49 pm
Location: East Maitland

Re: Petit’gguy Strayblack and Catcos

Post by B61 MACK »

Looking good so far takes a bit to get the hang of using a airbrush but once you do there is no limit to what you can do with it.
User avatar
Bear
Part of the Furniture
Posts: 540
Joined: Fri Dec 25, 2015 2:14 am
Location: Adelaide

Re: Petit’gguy Strayblack and Catcos

Post by Bear »

How was the experience? I have one of those compressors too and some cheap airbrushes so am a lot curious.
User avatar
sandboarder
Part of the Furniture
Posts: 2764
Joined: Tue Dec 29, 2015 1:55 pm

Re: Petit’gguy Strayblack and Catcos

Post by sandboarder »

Bear wrote: Sun May 24, 2020 1:04 am How was the experience? I have one of those compressors too and some cheap airbrushes so am a lot curious.
I’m only using the compressor. The airbrush I bought cane with a larger flexible hose and I added a U-star moisture trap. I only sprained the silver but it worked good, never let me down. Quickly built up the pressure and cuts out until you start using it. Adjustable air pressure, reasonably quite. Let’s see how it goes when it’s warm enough to spray the next coat of paint
User avatar
Luke
Part of the Furniture
Posts: 2420
Joined: Mon Dec 21, 2015 7:19 pm
Location: Port Pirie SA (aka Lead City)

Re: Petit’gguy Strayblack and Catcos

Post by Luke »

sandboarder wrote: Let’s see how it goes when it’s warm enough to spray the next coat of paint
This coming Friday would be the go, it will be around 20.
User avatar
Bear
Part of the Furniture
Posts: 540
Joined: Fri Dec 25, 2015 2:14 am
Location: Adelaide

Re: Petit’gguy Strayblack and Catcos

Post by Bear »

Cool, good to know, so far so good. Thanks.
User avatar
sandboarder
Part of the Furniture
Posts: 2764
Joined: Tue Dec 29, 2015 1:55 pm

Re: Petit’gguy Strayblack and Catcos

Post by sandboarder »

Made the most of a nice day. Little bit of peal but crossed the final clear coat can hide that.

Image
User avatar
Luke
Part of the Furniture
Posts: 2420
Joined: Mon Dec 21, 2015 7:19 pm
Location: Port Pirie SA (aka Lead City)

Re: Petit’gguy Strayblack and Catcos

Post by Luke »

Looks pretty good to me mate thumbsup
Is that all you got done 3 spoons stirrer
So thats the clear purple, clear orange and clear yellow.
User avatar
B61 MACK
Part of the Furniture
Posts: 4298
Joined: Thu Dec 24, 2015 3:49 pm
Location: East Maitland

Re: Petit’gguy Strayblack and Catcos

Post by B61 MACK »

nice colours.
User avatar
sandboarder
Part of the Furniture
Posts: 2764
Joined: Tue Dec 29, 2015 1:55 pm

Re: Petit’gguy Strayblack and Catcos

Post by sandboarder »

Luke wrote: Wed May 27, 2020 5:34 pm Is that all you got done 3 spoons stirrer
Yep took 90 minutes but I got the 3 spoons done rofl

Cheers guys :D

Colours are clear yellow, clear orange and clear violet GX. I think it’ll look good when completed but crossed I can get it cleared Friday first then it won’t take long to finish. I did finish a SDCS kit but decided to paint instead of taking pics :o
User avatar
sandboarder
Part of the Furniture
Posts: 2764
Joined: Tue Dec 29, 2015 1:55 pm

Re: Petit’gguy Strayblack and Catcos

Post by sandboarder »

Clear coat is on yes! I should have this finished tomorrow. I’m keen to see it in the sun and hear what every body thinks.

Image
Post Reply